How to best use TV models AV-56WP94 and AV-65WP94
What's ATSC?
ATSC, which stands for Advanced Television Systems Committee, is a broadcasting system of
terrestrial digital broadcasting. To receive ATSC, you need an antenna. An indoor antenna is able
to receive a signal, but use of outdoor antenna is recommended. You can also receive a signal by
Cable, but service may not be provided by certain Cable companies. Ask your cable company for
more information.
How to receive ATSC
In order to receive an ATSC signal, you must first run the AUTO TUNER SETUP available in the
"Interactive Plug In Menu" or regular "Menu" on your TV. When the Auto Tuner Setup is executed,
the level indicator of the Scan Menu can be set at a higher sensitivity than the normal range. In
this case, an ATSC capable channel may be set at a high level, but the real level may be too low
to receive the ATSC signal. Under these conditions, you will not be able to receive that channel. If
this happens, please follow the steps below, "How to Adjust Your Antenna" in order to receive your
channel.
How to Adjust Your Antenna
If you can not receive your requested channel, please try following the steps below to adjust your
antenna.
1. Check the RF Channel of your requested Channel, and input the channel as DCS##. (## is
the channel number which you want to receive.)
2. If you can't receive a signal, press the OK key. Then, the following banner will appear. This
channel banner appears for at least 1 minute. Pressing and holding the up/down and left/right
key will make the banner remain continuously
23-0 WWWW
3. Adjust your antenna to set the signal level to the maximum.
4. Once the level indication of the banner reaches the maximum, DSC## needs to be operated
again. Then you can select your requested channel.
Sep.10 (Wed) 5:06PM
1