Advertisement
(_
Press the MENU button
AV
To CONVERGENCE
_11_
To Enter
At'
To choose MANUAL
_1 i_
To Enter
If all the lines are white, no convergence
adjustment
is
necessary.
If not, you need to perform the manual color
convergence
below.
iiiiimmmmmiim
|IIIIIIIIIIII
|IIIIIIIIIIII
|IIIIIIIIIIII
BIIIIIIIIIIII
gIIIIIIIIIIII
gIIIIIIIIIIII
gIIIII_IIIII
gIIIII_IIIII
|IIIIIIIIIIII
gIIIIIIIIIIII
gIIIIIIIIIIII
gIIIIIIIIIIII
gIIIIIIIIIIII
gIIIIIIIIIIII
Select the location you want to adjust by using the
number buttons on the remote control.
You can select any of the 81 points.
(_
Press the SELECTbutton to change the color of the
box : : to the color of the cross you wish to adjust (red or blue).
AV_II_
Adjust the position of the cross.
Adjust the three color crosses until they overlap and appear as a single white
cross.
Press the OK button
Notes:
• When you adjust the convergence,
make sure you start with the center position (position 5),
and work your way around radially for best results.
• When you make the adjustment in the center (position 5), you are making the adjustment for
the whole screen. In other positions, you are making the adjustment
only in that area.
• You can reset the adjustment
if you do not like the results. See below.
RESET resets all convergence
adjustments
to the factory default settings.
(_)
Press the MENU button
At'
To CONVERGENCE
_11_
To Enter
At'
To RESET
_1 i_
To enter
When the adjustment
is reset, it will return to what you were watching.
Advertisement
