Advertisement
Use either the television's
own tuner oracable b ox toselect channels.
Set t his switch toTVto
operate the television's
built-in tuner. Move t he switch toCATV t ooperate acable b ox.
Note:
• See page 2 5forinformation
onprogramming
your remote forcable b ox operation.
kV£o,] _TJ J__vA
J]B']I'__ B']vTflfi'_ r
You can control a VCR or DVD player with the buttons on the lower part of the remote control.
Move the slide switch to VCR or DVD to operate.
Notes:
• The remote is preset with the code 000 to control JVC-brand VCR's. For any other
manufacturer's
brand VCR, please see the code chart and instructions
on page 26.
• The remote is preset with the code 000 to control JVC-brand
DVD players. For any other
manufacturer's
brand DVD player, please see the code chart and instructions
on page 27.
kv£o,] r,_l I-'_f_
"4 ]
You can use this remote control to operate the basic functions of your VCR. These functions
include: play, record, rewind, fast-forward,
stop, pause, channel scan, TV/VCR, power on, and
power off.
Move the selector switch to VCR to operate.
• The remote is preset with the code 000 to control JVC-brand VCR's. For any other
manufacturer's
brand VCR, please see the code chart and instructions
on page 26.
You can also use this remote control to operate the basic functions of your DVD player. These
functions include: play, rewind, fast-forward,
stop, still/pause, previous/next,
tray open/close,
power on, and power off.
Move the selector switch to DVD to operate.
• The remote is preset with the code 000 to control JVC-brand
DVD players. For any other
manufacturer's
brand DVD player, please see the code chart and instructions
on page 27.
All remote control buttons are illuminated, except for the TV/CATV slide switch, VCR/DVD slide
switch and Light button.
Press the lIGHT button to turn the illumination on for 4 seconds.
Advertisement
