Advertisement
Auto Tuner Setup
In auto tuner setup, the TV automatically
scans through all available channels, memorizing
the
active ones and skipping over blank ones or channels with weak signals. This means when you
scan (using the CHANNEL+/-- buttons) you will receive only clear, active channels.
TUNER
MODE
(CABLE)
" START
_SE_ECT_
_E_TE
.......
To choose CABLE orAIR (or SKIP when
you skip Auto Tuner Setup)
To START
NOW
I
PROGRAMMING!
u ,,,
48
Programming
will take approximately
1 to 2
minutes.
When the setup is finished, THANK YOUH SETUP IS NOW COMPLETE
is displayed. Your
quick setup is now complete. You can now begin watching your television, or you can continue
on in this guide for more information
on programming
your remote control, or using the
JVC onscreen menu system to customize your television viewing experience.
Notes:
• Noise muting will not work during Auto Tuner Setup.
• Skip appears only for interactive plug-in menu.
Cable Box and Satellite
Users:
After your auto tuner setup is complete, you may, (depending
on the type of hookup), have only 1 channel, usually 3 or 4 in the auto tuner memory.
This is
normal.
The Quick Setup
is complete
Advertisement
