Operation; Preliminary; Environment And Handling; Mounting - BRUEL & KJAER 4914 Instruction Manual

Rhino-larynx stroboscope
Table of Contents

Advertisement

3.
OPERATION
3.1._
PRELIMINARY
3.1.1. Environment and Handling
3.1.2. Mounting
The Rhino-Larynx Stroboscope Type 4914 has been designed for operation in environ-
ments with ambient temperatures between +5 to +40
°
C ( +41 to 104
°
F) and humidities
up to 90% RH (non-condensing). For safe operation, avoid use in environments contain-
ing volatile liquids and gasses. Also verify that the Type 4914 is set to match the avail-
able supply voltage and that the correct fuses are installed before each use of the
instrument.
The Type 4914 may be used free standing on its four plastic feet or, for easier viewing,
the front may be raised by folding down the metal stand attached to the front feet.
Fig. 3. 1. The Rhino-Larynx Stroboscope Type 4914 with front raised
using the stand on the base of the instrument. The Accessory
Tray GV 1895 in front is fixed onto the table edge with dou-
ble-sided adhesive tape
The Accessory Tray (GV 1895) included may be fixed onto a table edge by means of
double-sided adhesive tape (see Fig. 3.1.). Alternatively it may be fixed to a wall by
fastening screws through the two holes in its back.
7

Advertisement

Table of Contents
loading

Table of Contents