Table of Contents
Advertisement
GENERAL SAFETY PRECAUTIONS
Explosion Hazard
The apparatus is not constructed for use in potentially explosive environments and
should therefore not be operated in the presence of flammable liquids or anaesthetics.
Connection of Power
During installation of the apparatus, check that it is set to match the available mains
voltage and that the correct fuses are installed.
The mains input socket, all connectors and cables should be kept clean and dry at all
times.
Connection of other Apparatus
If a safe method for connecting (coupling) instruments cannot be seen clearly from tech-
nical data supplied, the user must consult the relevant manufacturers to ensure that the
safety of the entire system of equipment is not impaired.
Equipment Failure
Whenever it is likely that the correct function or operating safety of the apparatus has
been impaired, it must be disconnected from the mains supply and secured against
unintended operation.
Service and Repair
Service and repair of electro-medical equipment should only be carried out by the man-
ufacturer or by their authorised representatives, as otherwise all responsibility for the
operating safety, reliability and performance of the equipment is disclaimed.
Following repair the safety of all apparatus should be checked by a qualified electronics
engineer or hospital safety personnel.
Electromagnetic Interference
Complies with FCC Class B Device regulations and the (82) 499/EEC rules.
Advertisement
Table of Contents
