Mount Devices; Mount The Camera - Crestron UC-M50-Z Quick Start Manual

UC-M50-Z
Crestron Flex Tabletop Medium Room Video Conference System for Zoom Rooms® Software

Mount Devices

Mount the UC Bracket Assembly
Mount the UC Bracket Assembly to VESA® compliant display devices, a
wall, or other building structure. Anchors and screws are supplied for
installation on walls with 3/8 in. (9.5 mm) to 3/4 in. (19 mm) thickness.
CAUTION: Preinstalled screws may protrude from the back of the
UC Bracket Assembly. Exercise caution when handling the UC
Bracket Assembly to avoid scratching or damaging surfaces.
NOTE: The integrated cable tie wraps are reusable. Avoid damaging
the cable tie wraps.

Mount the Camera

Mount the included camera according to the
(Doc. 8257).
UC-CAM-WMK Quick Start
Install the Cable Retention Plate
The included cable retention plate provides tie-down points for cables
that connect to the Crestron® conference device.
Remove the adhesive backing from the cable retention plate and install
the plate on the underside of the conference device as shown in the
following diagram. Ensure the cable retention plate is firmly attached
before securing cables.
CAUTION: When turning over the device, place the device on a soft
surface to avoid damage.
NOTE: If a swivel mount kit (CCS-UCA-SMK) is to be used, use the
cable retention bracket included with the swivel mount kit as
described in the CCS-UCA-SMK DO Guide
Quick Start
(Doc. 7882).
2