Page 2
A Phillips head screwdriver and hammer is required for the assembly of this product. VII. Maintenance Guide onto the wood) hen needed after that to keep the drawers sliding smoothly.
Page 5
Step 1 Insert wooden dowel (B) into parts 01, 02, 03, 05, 06. ø8*30mm Step 2 Insert wood dowel (C) into parts 25. ø10*20mm Attention to the dowel lenght: ø10*20mm...
Page 6
Step 3 Insert Cam Bolts (I) with a Phillips head screwdriver into parts 02, 03, 13. ø5,0*24mm Step 4 ø4*25mm Secure parts 25 to parts 02 and 03 with screw (M) and phillips head screwdriver.
Page 7
Step 5 Secure part 05 to part 03. Insert cam locks (J) into part 5 and tighten with a Phillips head screwdriver. Back edge ø15*12mm Step 6 Secure part 02 to part 05. Insert cam locks (J) into part 5 and tighten with a Phillips head screwdriver.
Page 8
Step 7 Secure parts 13 to part 01. Insert cam locks (J) and tighten with a Phillips head screwdriver. ø15*12mm Step 8 Secure parts 13 to parts 02, 03. Insert cam locks (J) and tighten with a Phillips head screwdriver. ø15*12mm...
Page 9
Step 9 Insert screw (K) into part 04 and 06, and tighten with hex key (L). ø7,0*50mm Step 10 ø4,0*40mm Secure part 04 to parts 02, 03 with screw (D) and tighten with a Phillips head screwdriver.
Page 10
Step 11 Insert part 07 into parts 02, 03, 04, 05. Fi x with nail (G) and hammer. Name and address of the supplier and date of production. Remove the felt sticker from the paper. Glue the felt to the bottom of the foot. ø30mm ø8*8mm Step 12...
Page 11
Step 13 ø15*12mm Secure parts 09 and 10 to part 08 using Cam Lock (J) and tighten with a Phillips head screwdriver. Step 14 Insert part 12 between parts 09 and 10. Secure part 12 to parts 09 and 10 with screw (E) and phillips head screwdriver.
Page 12
Step 16 Insert wood dowel (B) into part (25) with hammer. FRONT ø8*30mm Step 17 Insert wood dowel (A) on the inside of all drawers, with the drawer inside the unit, after having passed the wood dowel that is in the drawer slide. ø8*40mm P.12...
Page 13
Step 18 Insert cam lock cover (N) into cam lock (J) in the parts 02, 03. ø17mm P.13...