Related Manuals for Walker Edison W58CSP
Summary of Contents for Walker Edison W58CSP
- Page 1 Item #: W58CSP Assembly Instructions For our most current instructions, to request missing, lost or broken parts, or for any other Customer Service issues, please visit our website at www.walkeredison.com or call us at 877-207-5906. Revised 03/2012...
- Page 2 General Assembly Guidelines Insure that all parts and hardware are available before beginning assembly. Follow each step carefully to insure the proper assembly of this product. III. Two people are recommended for ease in the assembly of this product. The main types of hardware used to assemble this product are: wood dowels, cam bolts and locks, bolts and screws.
- Page 3 Parts List...
- Page 4 Hardware List...
- Page 5 Insert dowels (A) into panel (2). Screw cam bolts (B) into panels (1,2). Insert dowels (A) into panel (4) and slats (6,7). Screw cam bolts (B) into slat (5).
- Page 6 Insert dowels (A) into legs (11,12,13,14) and panels (3). Screw cam bolts (B) into legs (11,12,13,14). Attach legs (11,13) to panel (3) using cam bolts and dowels as guides. Insert cam locks (C) into panel (3) and tighten with a screwdriver.
- Page 7 Attach legs (12,14) to second panel (3) using cam bolts and dowels as guides. Insert cam locks (C) into panel (3) and tighten with a screwdriver. Attach slat (7) to panel (2) using cam bolt and dowels as guides. Insert cam lock (C) into slat (7) and tighten with a screwdriver.
- Page 8 Attach support leg (8) to panel (2) using bolts (D). Tighten bolts (D) with wrench (H). Attach slat (5) to panel (4) using cam bolts and dowel as guides. Insert cam locks (C) into panel (4) and tighten with a screwdriver.
- Page 9 Attach panel (4) to panel (2) using bolts (D). Tighten bolts (D) with wrench (H). Attach slat (6) to slat (5) using dowel as guide.
- Page 10 Attach panel (3) with legs (11,13) to the assembly from the previous step using cam bolts and dowels as guides. Insert cam locks (C) into panel (2) and slat (6) and tighten with a screwdriver. Attach second panel (3) with legs (12,14) to the assembly from the previous step using cam bolts and dowels as guides.
- Page 11 Carefully slide panels (10) into place along the back of the assembly. Carefully attach panel (1) to the assembly using cam bolts and dowels as guides. Insert cam locks (C) into the assembly as shown above and tighten with a screwdriver.
- Page 12 Secure panels (10) with plastic wedges (E) and screws (F). Cover all visible cam locks with stickers (K) as desired.
- Page 13 Insert shelf support pins (G) into the assembly at desired shelf heights. Carefully place shelves (9) on shelf support pins (G).