Related Manuals for Totevision LCD-1042VB
Summary of Contents for Totevision LCD-1042VB
- Page 1 TFT LCD COLOR MONITOR User’s manual Model: LCD-1042VB 10.4” Model: LCD-1211VB 12.1” Model: LCD-1512VB 15.1” ® 1319 Dexter Avenue N., Suite 020 Seattle, WA 98109 TEL:206/623-6000 FAX:206/623-6609...
- Page 2 Thank you for Purchasing this ToteVision product. Before attempting to operate your video Monitor, please carefully read this manual. Content 1. Precautions 2. Package contents 3. Location of Controls 4. Monitor Use 5. Cleaning instructions 6. Adjust the monitor 7. Specifications...
-
Page 4: Location Of Controls
3. Location of Controls 10.4” Front View 10.4” Rear View 10.4” Vesa View 7. SPECIFICATION: On screen display for: brightness, contrast, back light, hue & Tint S-video capability Sunlight readable Very High Brightness LCD panel For color applications Wide viewing angle High contrast ratio Active matrix technology eliminates distortion... - Page 5 Miscellaneous： Signal Source：To choice signal for D-SUB、CVBS or S-VIDEO. Mode Select：To choice mode by 640x400 or 720x400. Reset：Select this function can make the monitor have the best efficiency. Volume：Without audio function. EXIT OSD：Exit the OSD function selection main menu. Note：You don’t need to use AUTO CONFIG function when in the VIDEO IN mode.
- Page 6 15.1” Front View 15.1” Rear View Function： Auto Adjust：Select this function can make the monitor have the best efficiency. Auto Colour：Select this function can make the color have the best efficiency. OSD Menu： Language：There are 8 type languages can be selected.
-
Page 7: Cleaning Instructions
S-video) c. Push the Power Switch ON 5. Cleaning instructions Turn off the monitor before cleaning the LCD screen. Use a Slightly damp (not wet) cloth. Do not use an aerosol spray directly on the LCD screen because over-spray may cause electrical shock. -
Page 8: Adjusting The Monitor
6. Adjusting the monitor Control Button Power Power Decrease Menu / Enter ( - ) Switch 1.Power Switch：Pressing this button turns the display system power on or off. 2.Power LED：This Power LED indicates different status when this unit operates in different modes. It shows the orange color in standby mode and it shows the green color in power-on mode.
Need help?
Do you have a question about the LCD-1042VB and is the answer not in the manual?
Questions and answers