Table of Contents
Advertisement
The RZ/G2L100&RZ/V2L100 implements a PCM/I2S with 4 wires, LRCK,CK, SDOUT and SD IN, The I2S signals are
connected directly to the RZ/G2L&RZ/V2L SoC. These signals are driven at 1.8V.
5 14-pin Low Speed(LS) expansion connector
The following tables show the Low Speed Expansion Connector pin out:
Pin No.
1
3
5
7
9
11
13
5.1 Speaker
The speaker signals are routed from the DA7211 built-in Audio CODEC, the two signals are:
SKP_P - Class-D speaker amplifier output+
SKP_N - Class-D speaker amplifier output-
5.2 Mic
The microphone signals are rounded to the DA7211 Built-In CODEC, the three signals are:
MIC1_IN - Headset mic
MIC2_IN - Second mic, please note that the first microphone input, MIC1_IN is routed from an on-board analog
microphone
MIC_BIAS1
- Ground reference for PMIC bias
5.3 Headset
The headset signals are rounded from the DA7211 Built-In CODEC, one signal is routed from the connector to the
CODEC, the singles are:
HP_N
- Headphone PA right channel output
HP_P
- Headphone PA left channel output
HS_DET - Headset detection,connects to P40_2 of RZ/G2L&RZ/V2L SoC.
6 60-pin High Speed(HS1) expansion connector
The following tables show the High Speed Expansion Connector pin out:
Pin No.
1
Room 02-04, 10/F, Block A, Building 8, Shenzhen International Innovation Valley, Dashi Road,
Nanshan District, Shenzhen, Guangdong, China
Pin definition
SPK_P
SPK_N
AGND
MIC1_IN
MIC2_IN
MIC_BIAS
AGND
Pin definition
HS1_SD1_DATA0
2
Pin No.
2
4
6
8
10
12
14
Pin No.
MIPI_CSI0_CLKP
Pin definition
HP_P
HP_N
HP_DET
D5.0V
DC_12V
DC_12V
AGND
Pin definition
9
Advertisement
Table of Contents
