Installing The Product - NEC NE3304-149 User Manual

4-2. Installing the Product

Follow the steps below to install this product to the server.
Disconnect the power plug before working with the product.
Before installing this product in the server, disconnect the power plug from a power outlet. In addition, do
not connect or disconnect the power plug while your hands are wet. Failure to follow this instruction may
cause an electric shock as well as malfunctions of the product.
Refer to the User's Guide of the server for details.
When disconnecting a power cord, hold the plug, and pull it out. Pulling the power cord out by the cord
portion could damage the coating to result in an electric leak or an electric shock.
Pay attention to hot surface
Immediately after the server is powered off, its internal components are very hot. Leave the server until its
internal components fully cool down before installing/removing any component.
Connect the product firmly.
Connect the product with PCI slot securely. Loose connection may cause fumes or fire.
１.
After making sure that the server is off-powered (POWER LED is unlit), pull the power plug out
from power outlet.
２.
Remove the cover and other components from server in accordance with the User's Guide of
the server.
３.
Install this product in PCI slot in accordance with the User's Guide of the server.
４.
Mount the cover and other components you have removed in Step 2, according to the User's
Guide of the server.
 If the server is powered on (POWER LED is lit), shutdown the operating
Important
system, and turn off the server.

Before a product is installed in Server, please remove SFP+ Module
Important
and DA cable.

The location of PCI slots depends on the server, and how to install/remove
Note
the PCI Express card also differs depending on the server. Be sure to read
the User's Guide of the server before starting work.

If you feel difficult to install this product in PCI slot of the server, remove it
once, then install it again. Applying excess force may damage the card.
WARNING
CAUTION
- 38 -