Table of Contents
Advertisement
Trolling Speed Control
[standard equipment (LHTC
TRL (Trolling) CONTROL
SWITCH
[standard equipment (LRTB
type)]
[optional equipment (except
LHTC and LRTB types)]
DN: Reduce engine speed
UP: Increase engine speed
Place the outboard in-gear with the
throttle control in the fully closed
(idle) position. Press and hold the UP
or DN side of the TRL switch to
activate the Trolling Speed Control.
The buzzer will make one long sound
indicating activation.
The initial trolling speed is set at 850
RPM.
The engine speed can be adjusted in
50 RPM increments. A short sound
of the buzzer occurs each time the
engine speed is adjusted.
In Trolling Speed Control mode, the
engine speed can be adjusted
between 750 and 1,000 RPM.
Continuing to press the switch when
at either of these limits will result in
two short sounds from the buzzer.
The throttle control will operate
when in the Trolling Speed Control
mode, but once the speed reaches
3,000 RPM, the Trolling Speed
Control is deactivated. If 3,000 RPM
is not reached and the throttle is
OPERATION
closed, the engine speed will
decrease to the Trolling Speed
Control setting.
67
Advertisement
Table of Contents
