Table of Contents
Advertisement
OPERATION
FAST IDLE RANGE
3. Leave the fast idle lever in the
START (fully lowered) position.
The fast idle lever cannot be raised
unless the control lever is in the N
(neutral) position.
The control lever cannot be moved
away from the N (neutral) position
unless the fast idle lever is lowered
4. Turn the ignition switch key to the
ON position; the buzzer will sound
two times.
54
START
(LOWEST
POSITION)
IGNITION SWITCH KEY
5. Turn the ignition switch key to the
START position and hold it there
until the engine starts.
When the engine starts, release the
key, allowing it to return to the ON
position.
If the engine fails to start within 5
seconds, release the key and wait
at least 10 seconds before
operating the starter again.
NOTICE
• Using the electric starter f o r more
than 5 seconds at a time will
overheat the starter motor and can
damage it.
• Turning the ignition switch key to
the START position while the
engine is running can damage the
starter motor and flywheel.
Advertisement
Table of Contents
