Advertisement
Contents
Referring to the illustration below, confirm all parts are present upon receipt of camera.
Lens Mount Cap
Description of Parts
Front
Side
AUTO IRIS
Rear
OSD
AUTO IRIS
WAT-2500 / WAT-3500 (Camera)
VIDEO
OUT
POWER IN
(DC+12v)
MADE IN JAPAN
WPDC12 ( DC Plug)
①IMAGE SENSOR / Sensor Window
The light receiving face of the image sensor. Dirt, water
or oil deposits on the image sensor will cause an unclear
picture on the monitor. Attach the lens cap to protect the
lens and the sensor from contamination and damage.
②LENS MOUNT
Mount for the lens (CS-mount)
③CS MOUNT SET SCREWS (BACK FOCUS)
3 adjustable hexagonal screws are placed at intervals of
120 degree around for focusing of the lens. Use the
supplied hexagon wrench for adjusting the back focus.
④DC-IRIS SOCKET
This socket is for connecting DC iris lens.
⑤TRIPOD MOUNTING SCREW HOLES
Mounting holes for stands. The size of these threads are
1/4", 20 threads, 4.5±0.2mm, which is the same as any
standard camera tripod (U1/4").
⑥VIDEO OUT TERMINAL
The terminal for composite video signal output.
⑦REMOTE CONTROL TERMINAL
The terminal designed for connection with the remote
control for setting the function on the OSD menu.
⑧POWER IN TERMINAL
This terminal is used to connect a DC plug to supply power.
| 03 |
Hexagon Wrench
Advertisement
