Download Print this page

Cautions For Safety - Watec WAT-3500 Operation Manual

1/2.8” multi-function compact high sensitivity analog camera
Hide thumbs Also See for WAT-3500:

Advertisement

Cautions for Safety

Please read and understand the "Cautions for safety" below to ensure the correct use of the product.
・Do not disassemble and/or modify the camera.
・Do not operate the camera with wet hands.
・Use the camera within the range of the power supply voltage specifications
The recommended voltage is DC+12V±10%. Also, we advise the use of an "inline fuse" power line to
protect the camera and peripheral equipment, where applicable.
・Do not expose the camera to wetness or high moisture conditions.
The camera is designed and approved for indoor use only.
The camera is not water-resistant or waterproof.
・Protect the camera from condensation.
Keep the camera dry at all times during storage and operation.
・Should the camera not work properly, unplug the power immediately.
Check the camera according to the "Problems and Trouble shooting" (P.5) section.
・Avoid the striking of hard objects or dropping the camera.
The camera use high quality electrical parts and precision components and may
inadvertently be damaged if not cared for properly.
・Do not connect any power supply directly to the video out terminal of the unit.
Applying voltage to the video output terminals may cause damage.
・Do not install the camera in a position subject to direct sunlight.
Sunlight shinning directly onto the camera lens can cause damage to the sensor.
・Select a stable place for installation of the camera.
Use an appropriately rated mount durable and strong for all installation position.
・Turn off the power of the camera and peripherals when moving them and
disconnect the all connecting cables.
Before moving the camera, always remove any cables from the rear of the camera first.
Follow the procedure below to disconnect the cables.
1) Remove the video cables connected to the camera.
2) Remove the power cables connected to the camera.
・Avoid using the camera near any strong electro-magnetic field.
In the event of exposure to electromagnetic waves (causing the monitored image to become distorted)
we recommend the camera be shielded by an appropriate protective casing.
| 02 |

Advertisement

loading

This manual is also suitable for:

Wat-2500