Table of Contents
Advertisement
SPLIT
TYPE
7.3 Installation process of indoor unit
Step1:Drill holes on the wall in the following drawing.
Step2:Install expansion bolts and forecasted pannel.
Step3: Attaching indoor unit to the wall.
• While lifting the indoor unit, at least two persons should be joined. Weight of the indoor unit is more than 50kg.
• The indoor unit must be installed vertically to the ground and fastened securely.
• Before commissioning, the dust-proof cap of the automatic relief valve must be loosened, other than entirely being
removed away, and it can be tightened in case that it leaks.
Wall
Wall
NOTE
Air-to-water Heat Pump Split Versati
Wall
Mounting
bracket
Anchor bolt X3
Wall
Wall Insulation pad
Note
21
Advertisement
Table of Contents
