Philips NX0960 Manual page 6

ENGLISH
6
Warranty and support
Versuni offers a two-year warranty after purchase on this product. This warranty is not valid if a defect
is due to incorrect use or poor maintenance. Our warranty does not affect your rights under law as a
consumer. For more information or for invoking the warranty, please visit our website
www.philips.com/support.
Declaration of Conformity
Hereby, DAP B.V. declares that the Air Cooker (NX095x; NX096x) is in compliance with Directive
2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
https://www.philips.com.
This appliance is equipped with a WiFi module, 2.4GHz 802.11 b/g/n with a maximum output power of
92.9mW EIRP.
Software updates
Updating is essential to safeguard your privacy and the proper functioning of your Air Cooker and the
App.
Please always update the App to the latest version. Also the Air Cooker is updating the firmware
automatically.
Note
• In order to enable the Air Cooker to update to the latest firmware version make sure your Air
Cooker is connected to your home WiFi.
• Always use the latest App and firmware.
• Updates are made available when there are software improvements.
• A firmware update is started automatically when the Air Cooker is in stand-by mode. This update
takes some minutes. During this time the Air Cooker cannot be used.
Device compatibility
For detailed information about the compatibility of the App, please refer to the information in the App
Store.
Factory reset
For a factory reset of the Air Cooker, select the factory reset function in the Tools/Settings menu.
Your Air Cooker is then no more connected to your home WiFi and not paired with your smart device
anymore.
Pairing
The Air Cooker can be remotely controlled by one user only at the same time. If a second user wants to
control the Aircooker and use the NutriU App, the pairing process has to be followed. This will unpair
the first user automatically.