Table of Contents
Advertisement
6.
Select one of the three equivalent "u-blox Modem USBx AT and Data" modem interfaces for
communication. See also the LARA-R6/L6 series system integration manual, [11].
☞
LARA-R6 by default is not powered on but can be either by the NINA-W106 through code
or by the "Pwr On" button. NINA-W106 should be available to load code through the "Silicon
Labs CP210x UART Bridge" serial interface.
7.
Proceed with the instructions described in the
☞
A USB driver for LARA-R6 is needed for communication through the USB connector (for example
when using LARA-R6 with m-center software). The LARA-R6 USB driver can be downloaded from
the LARA-R6 product page [13]. LARA-R6 USB drivers are not needed for communication with
LARA-R6 through the NINA-W106 module, and ZED-F9R and NEO-D9S modules do not need
additional drivers for Windows PC.
UBX-23003719 - R02
C1-Public
file [15].
README.md
Quick start guide
XPLR-HPG-2 - User guide
Page 29 of 32
Advertisement
Table of Contents
