Setting Up Your Home Dvd Stereo System - Pyle PHCD26 User Manual

BACK PANEL
1. HD OUTPUT: Connect an external HDMI device to this jack.
2. AUDIO OUT: Connect an external L/R device to this jack.
3. VIDEO OUT: Connect an external VIDEO device to this jack.
4. AUX IN: Connect an external audio device to this jack.
5. FM Antenna: Provides an improved FM signal.
6. AC IN jack: Connect the AC cord (included) to this jack to operate your Home
Stereo System on AC power.
SETTING UP YOUR HOME STEREO SYSTEM
Connecting the AC cord
1. Make sure that your local AC power source matches the voltage shown on the
plate located on the bottom of the Home Stereo System.
2. Insert the small connector at the end of the AC cord into the AC IN jack on the
back of your Home Stereo System.
3. Plug the AC cord into a wall power outlet.
Notes: Unplug the AC cord when not in use.
•
Power Electrical Specs: 110-240V - 50/60 Hz
Connecting Headphones
Plug the headphones into the headphone jack in your Home Stereo System.
CAUTION: Listening to music with the volume too loud can damage your hearing.
Before you connect headphones, turn the volume down. After you put on the
headphones, gradually increase the volume to a comfortable level.
10
www.PyleUSA.com