Pyle PHCD26 User Manual page 14

Important:
Make sure that the device you connect and select as your sound source output sound
to the Home Stereo System. See your device's user manual for more information.
Disconnecting your devices
Turn OFF the Bluetooth function on your device.
Reconnecting to a paired device
When you select "bt" mode, your Home Stereo System automatically connects to
a previously paired device. If it fails to connect, please check the following:
Your Home Stereo System loses the
Bluetooth connection if you...
Turn it OFF
Move the Bluetooth device
out of range.
Turn OFF your Bluetooth device
Turn OFF Bluetooth on your
Bluetooth device
Connect your Bluetooth device to
another Bluetooth device
Change your Home Stereo
System input source
Note:
If a device does not automatically reconnect, you may need to reselect "Pyle USA"
on your Bluetooth device.
14
www.PyleUSA.com
To reconnect...
Turn ON your Home Stereo System.
Your Home Stereo System searches for the last
connected Bluetooth device and reconnects.
Move your Bluetooth device within 33 ft.
(10m) of your Home Stereo System.
Turn on your Bluetooth device, then make
sure that Bluetooth is ON.
Turn ON Bluetooth on your BT device
Disconnect your Bluetooth device from the
other Bluetooth device, then set your device
to pairing mode. Select "Pyle USA" on your
Bluetooth device.
Change the Home Stereo System
input source back to Bluetooth.