Table of Contents
Advertisement
Notes:
•
If a CD is inserted incorrectly, is dirty, or is damaged, or is not present at all,
NO appears on the display.
•
To prevent damage to the CD, never open the CD door while the CD is rotating
and never touch the lens.
Pausing CD Playback
1. Press
(play/pause). Playback stops but the CD continues to spin and the elapsed
time of the current track on the display.
2. Press
(play/pause) again to resume normal CD playback.
Skipping or Searching a CD track
1. During playback, press
track, respectively.
2. Press
(fast forward) or
or backward, respectively.
Using Repeat mode
1. Press REPEAT while in playback mode to cycle through the repeat modes
(Repeat current track, Repeat all, Random). The following appears on the display:
•
REP ONE — Repeat current track
•
REP ALL — Repeat all tracks
•
RAN ON — Random playback
2. To cancel repeat mode, press REPEAT until the OFF icon appears on the display.
Playing USB ash drives
1. Press Standby to turn ON the Home Stereo System.
2. Press MODE button repeatedly to select USB mode till "
display.
3. Connect the USB ash drive to the USB port.
Note: Make sure that you insert your USB drive all the way into the USB port.
/SCAN to begin/pause playback.
4. Press
5. Press
on remote control to stop playback, and the number of the total tracks
will appear on the display.
12
www.PyleUSA.com
(next) or
(previous) to skip to the next or previous
(backward) to quickly search the current track forward
"appears on the
Advertisement
Table of Contents
