Table of Contents
Advertisement
OPERATION
TURN ON/OFF THE UNIT
Press
button (7) to turn on the unit.
When the unit is on. Press and hold it for 2
seconds to turn off the unit.
SOUND ADJUSTMENT
Press
button (7) shortly to select the
desired adjustment mode. The adjustment
mode will be changed in the following
order:
BAS-TRE-BAL-FAD-BEEP-EQ-LOUD-ARE
A-LOC-STEREO- VOL
BAS: bass
TRE: treble
BAL: balance
FAD: fader
EQ: equalization
LOUD: loudness
LOC: local
VOL: volume
In each item press VOL+/- button (3/4), it is
possible to adjust the desired sound quality
or setting.
BEEP on/off
The device is equipped with 2 beep tone
modes.
- Beep on mode: The confirmation beep
sound is heard whenever a button is
pressed.
- Beep off mode: The confirmation beep is
switched off whenever a key is pressed.
EQ (Equalization)
Press it shortly to select the preset EQ
mode as below:
FLAT—POP—ROCK—CLASS—EQ OFF
LOUDNESS
In LOUD item you can turn on/off loudness
function by press VOL+/- button.
LOC on/off
In this item press VOL+/- button to turn on/off
local function. In LOC ON mode the unit will
reduce the receiving sensitivity when you
search station. That means you can receive
the station that sound is good. It will ignores
the station that sound is not good. In LOC
OFF mode it will increase the receiving
sensitivity when you search the station.
That means you can receive more stations.
STEREO/MONO
In this item press VOL+/- button to choose
STEREO or MONO mode. In STEREO
mode you can receive FM stereo signal. In
MONO mode the stereo station will be
switched
to
when the signal is not good. If you change
it to MONO mode. The noise will be
reduced.
DISPLAY TIME
Press CLK button (8) to show the time.
After 5 seconds it will return to show the
information.
SET THE CLOCK
Press and hold CLK button for 2 seconds.
The "HH" will flash. Using the knob
(10) to change the hour. After that press
CLK button the "MM" will flash. Press the
knob
(9)
After that press CLK button to confirm. If
you don't press CLK button to confirm. It
will writing here for your confirm.
AREA
In the AREA item of the SEL menu. There
are EUR/USA for your selecting. Press
VOL+/- to choose EUR or USA region.
LOW BATTERY DISPLAY
When the battery of the car is lower below
9V around. It will show "LOW BAT".
7
monochrome.
Sometimes
(10) to change the minute.
(9)
Advertisement
Table of Contents
