System Setup For Dvd Mode - Pyle PHSKR14 User Manual

SYSTEM SETUP FOR DVD MODE

Setup
Follow the steps below to check the connection:
1. Turn on the TV and shift to "VIDEO INPUT".
2. Turn on other units such as an audio or VCR if they are connected.
Turning the Unit On:
1. Press the POWER button on the panel. The DVD player will automatically read a
disc if it has already been inserted in the player.
2. Press the OPEN/CLOSE button to open the disc tray to insert or replace a disc.
3. Insert a disc onto the disc tray and press OPEN/CLOSE button again to close
the disc tray. The screen will display what type of disc is being played.
4. The DVD player will select the state of play according to the disc format.
DIS C FO RMAT
CD/ MP3
DVD/VCD/SVCD wit h PBC
DVD/VCD/SVCD without PBC
Note: PBC is the abbreviation for PLAYBACK CONTROL. If a disc has PBC, it means
that it has a menu from where you are able to choose a track, chapter or other
instruction at the beginning of playback.
ACTION
Playing a Disc:
Play
Pause
Next track or chapter
Previous track or chapter
Stop
Turning the Unit Off:
Press the STOP button, then press the OPEN/CLOSE button to open the disc tray.
Remove the disc and close the disc tray by pressing the OPEN/CLOSE button
again. Then press the POWER button to turn off the player. It is recommended
that discs are removed before the player is turned off. Remove the plug from the
outlet on the wall if the player will not be used for a long time.
8
www.PyleUSA.com
STATE OF PLAY
First track.
From the menu screen, press the PBC button
on the panel or on the remote control to play
back from the beginning.
Automatically plays from the beginning.
BUTTON ON PANEL
PLAY/PAUSE
PLAY/PAUSE
NEXT
PREV
STOP
KEY ON REMOTE CONTROL
PLAY
PAUSE
NEXT
PREV
STOP