Pyle PHCD26 User Manual page 16

Problem
A CD skips while playing
Theres noise or distorted
sound on FM radio
broadcasts
You don't hear any sound
The sound seems very low
USB drive will not play
My Home Stereo System
won't connect to my
Bluetooth device.
16
www.PyleUSA.com
• Make sure that your Home Stereo System is not
being a ected by vibration or shock.
Move the Home Stereo System if necessary.
• Make sure that you are using a compatible CD.
Your Home Stereo System can play standard and
3" audio CDs, CD-Rs, and CD-RWs.
• Extend the FM antenna.
• Rotate your Home Stereo System until the best
reception is obtained.
• Try turning off electrical appliances near your
Home Stereo System, such as hair dryers, vacuum
cleaners, or uorescent lights.
• Increase the volume.
• Plug in the AC power cord and press Standby to
turn on your Home Stereo System.
• Make sure that you have selected the correct
source.
• If you are in AUX mode, make sure the volume
has not been muted on your playback device.
If you are using AUX mode, make sure that the
volume is turned up on both your audio source
and your Home Stereo System.
• Disconnect the USB drive and insert it back to
the USB port all the way in.
• Make sure your USB drive is not formatted in NTFS.
• Shorten the distance between your Home Stereo
System and your Bluetooth device.
• Turn your devices off, then on. Re-pair your
Home Stereo System and your Bluetooth device.
• Make sure that your Home Stereo System is not
paired to another Bluetooth device.
• Make sure that your Home Stereo System and
Bluetooth device are both in pairing mode.
• Make sure that your Bluetooth device is not
paired to any other device.
• Make sure that you have selected "Pyle USA" on
your Bluetooth device.
Solution