Loewe Reference 85 User Manual page 76

Reference 55-85
User manual
System settings
Picture
3D function (1
You can use the 3D functionality of your TV set to display 3D material
transmitted by a channel or from an external player that is connected.
You require a pair of Loewe Active Glasses 3D to be able to use the
3D functionality in its entirety (see chapter Accessories). Please read
the operating instructions included with the 3D glasses.
3D mode
For 3D content that is being played back from an external HDMI
player, the 3D display format is normally recognised correctly when
the factory setting 3D mode
to set the 3D mode manually to view 3D content from broadcasters.
Owing to a reduction in the luminance in 3D mode for technical
reasons, Auto-dimming - Room and Auto-Dimming - Video
(VBD+) are deactivated when 3D contents is displayed.
If the TV set is operated with the remote control during a 3D
playback, flicker effects can occur in the 3D glasses when doing this.
Calling 3D mode
HOME: Call Home view.
Mark System settings,
OK call System settings.
Mark Picture,
go to next column.
Mark 3D,
go to next column.
3D
... 3D
3D-Modus
With this you can select the correct display format, should this not be recognised automatically, or you can deactivate
the 3D mode.
Select 3D mode.
Explanations concerning the 3D mode
Automatic If the TV is set to this setting (factory setting), then
the TV set automatically switches over to the correct
3D mode, if this is possible and supported by the
broadcaster.
Only change the setting if the 3D content is not
displayed correctly.
side by side To display 3D content in side by side format. When
viewing 3D content with this setting, two almost
identical images are displayed next to each other
and put together correctly by the TV set.
The 3D mode is Automatic reset the next time you
switch on the TV set.
top/bottom To display 3D content in top/bottom format. When
viewing 3D content with this option, two almost
identical images are displayed one above the other
and put together correctly by the TV set.
The 3D mode is Automatic reset the next time you
switch on the TV set.
76
Automatic is selected. You may need
Back
Automatic Side by side Top/bottom
Picture format / 3D mode
If 3D contents are recognised by the TV device, the picture format
cannot be subsequently changed. The picture format when in 3D
operation is always 16:9 PC.
Instruction / Symbol
If 3D content is detected by the TV set, a corresponding message
appears. The instruction text will disappear after the display time
has elapsed.
In the status display, 3D content is indicated by an icon.
125 ASTRA 3D
20:15 - 21:00 ASTRA 3D Demo
21:00 - 21:45 ASTRA 3D Demo
The following images will
be displayed in 3D mode.
For this part, put the 3D
glasses on and then
switch them on. Viewing
3D images for extended
periods of time can tire
out the eyes and/or cause
feelings of dizziness.
20:42 21.01.2013
Digital 2