Integrated Features; Reset To Factory Settings - Loewe Reference 85 User Manual

Reference 55-85
User manual
System settings
Extras

Integrated features

Here you can obtain information on the integrated features of the
TV set.
See the rating plate on the rear of the set for the precise product
designation.
Call Integrated features
HOME: Calling the Home view.
Mark System settings,
OK call System settings.
Mark Extras,
go to next column.
Mark Integrated features,
OK call Integrated features
Integrated features
... Integrated
Hardware
features
Manufacturer
Serial number
Article number
Chassis
CI Plus
Nicam
DD/DTS
PIP
Digital Recorder (DR+)
Channel 1
Channel 2
Wi-Fi module
Move content up and down with the cursor
Here you can obtain information on the integrated features of your TV set.
Select category (e.g. hardware, software,
etc.),
If necessary, scroll content up/down.
Hardware Under the Hardware item, you can find the article
and serial number of your TV set, the MAC address
and the chassis type with all existing hardware
components.
Software Under the item software, the current software ver-
sion and the installed software features of your TV
set are displayed.
Upgrade Under the item Upgrade you can find the installed
software features with their respective status.
Activated: software feature is installed and can be
used.
Not active: software feature is installed, but can not
be used.
(1 The screen graphic displayed is only an example. Depending on the device type, the available hardware/software components may be different.
120
(1
.
Back
Software Upgrade
LOEWE
834
54443W50
SL320
PRODUCTION
A/T/T2/C/C2/S/S2
T/T2/C/C2/S/S2

Reset to factory settings

Here you can reset some of the settings to the factory default values.
Call Reset to factory settings
HOME: Calling the Home view.
Mark System settings,
OK call System settings.
Mark Extras,
go to next column.
Mark Reset to factory settings,
OK call.
... ...
Entire TV Set
Picture/
sound
Network
HDMI
Browser
Media data
base
Select a category you want to reset,
OK call.
Select Start reset,
OK call.
Entire TV Set This resets the entire TV set to factory defaults.
By resetting the entire TV set to the factory default
state, all the settings you made and all stored
stations will be deleted.
Thereafter, an initial installation of the TV set is
carried out again (see chapter Initial installation).
Picture/ The current image and sound parameters of your TV
sound set will be deleted and reset to the factory defaults.
Network The current network settings of your TV set will be
deleted and reset to the factory defaults.
HDMI The HDMI setting is reset to the factory settings.
Browser The current browser settings of your TV set will be
deleted and reset to the factory defaults.
All data stored in the course of use are deleted.
Media data Your current media database is deleted because
base the database is reinitialised. The information from
the removable media (USB) and possibly the DR+
archive are then re-read.
The system then automatically performs a system
reset.
This resets the entire TV set to its factory settings.