M 160 — Dynamic Double-Ribbon Microphone
INSTALLATION AND OPERATION
Connection
�
The M 160 is equipped with a 3-pin XLR connector .
You can connect it to any microphone input using a
suitable microphone cable .
Caution: Carelessly laid cables are a trip hazard .
�
People can be injured and the microphone
can be damaged .
Operation
The two orange dots on the ring around the micro-
�
phone grille designate the longitudinal axis of the
two ribbons . When setting up the microphone on
tripods, make sure that this axis runs vertically .
Position the microphone so that monitor speakers
�
and other sound sources radiate laterally from
behind (angle approx . 110°) onto the microphone .
In this way, due to the noise cancellation of 25 dB at
110°, lateral sound reflections and disturbing ambient
noise are effectively suppressed .
The M 160 is supplied with the MA-CL 25 microphone
�
clamp for tripods with 3/8" thread . For tripods with
a 5/8" thread, you can unscrew the threaded insert .
Caution: A tripod with an insecure stand can fall
�
over and damage a microphone mounted
on it . Make sure the tripod stands stable .
MAINTENANCE
Use a soft cloth moistened with water to clean the
�
microphone shaft and grille .
Make sure that no water enters the microphone .
�
Do not use cleaning agents containing solvents .
�
DISPOSAL
This symbol on the product, in the operating
�
instructions or on the packaging means that
electrical and electronic devices must be
disposed of separately from household waste
at the end of their life cycle .
Always dispose of used equipment in
�
accordance with applicable regulations .
Dealers for electronic equipment are generally
�
obliged to take back waste electrical/electronic
equipment free of charge . This obligation also
applies to sales via remote communication .
For further information, please contact the local
�
authorities or the dealer from whom the product
was purchased .
TROUBLESHOOTING AND SERVICE
Should you have technical problems when using the
�
microphone or should you need more instructions,
please visit our FAQ website at
https://support.beyerdynamic.com
In case of service, please contact authorised service
�
personnel . Never open the microphone yourself, as
this could invalidate all warranty claims . Please visit
our website https://www.beyerdynamic.com for
service and replacement parts .
FURTHER INFORMATION
If you need further information, please visit our
�
website . On our product detail page https://www.be-
yerdynamic.com/m-160.html you will also find sound
samples .
If you would like to learn more about beyerdynamic
�
microphones for various applications, please visit
https://www.beyerdynamic.com/microphones-ma-
de-in-germany
WARRANTY
beyerdynamic offers a limited warranty of 2 years on
the purchased beyerdynamic product . The exact
warranty conditions can be found on our website at
https://www.beyerdynamic.com/service/warranty
CONFORMITY
Information on the conformity of the product can be
found on our website at https://www.beyerdynamic.
com/downloads
5