14 Clock Display/Timer; Configuring Date And Time; Displaying The Clock Menu Screen; Configuring The Local Clock Date - Kenwood TS-890S Instruction Manual

14 CLOCK DISPLAY/TIMER

Configuring Date and Time

This transceiver can display 2 types of clocks.
Local Clock
Displays the current date and time.
Auxiliary Clock
Displays information such as the UTC clock.

Displaying the Clock Menu Screen

1 Press [MENU] to display the menu screen.
2 Press F [CLOCK] to display the Clock menu screen.
• If F [CLOCK] is not displayed, press F [MORE] to display F
[CLOCK].
.
3 Select Clock Menu [0] "Date and Time".
4 Press F4 [SELECT].
The date/time configuration screen is displayed.
.
Pressing F7 [CANCEL] while the date and time
●
configurations for Local Clock is still in progress discards
the settings and returns the display to the Date and Time
configuration screen.
CLOCK DISPLAY/TIMER 14

Configuring the Local Clock Date

The date of the local clock that is used for display or the time stamp
in files can be configured as follows.
1 Select Clock Menu [00] "Date (Local Clock)".
2 Press F4 [EDIT].
3 Use the function keys and the [MULTI/CH] control
to select the date.
Key
F2 [–]/ F3 [+]
[MULTI/CH]
F4 [ ]/ F5 [ ]
The date and time is displayed in the parameter field of
●
the Clock screen according to the "Date Display
Format" setting.
The local clock cannot be configured when the auto time
●
correction function using the NTP server is ON.
4 Press F6 [OK].

Configuring the Local Clock Time

Follow the steps below to configure the local clock time. This is
usually configured to the local time of the location where this
transceiver is being operated.
1 Select Clock Menu [01] "Time (Local Clock)".
2 Press F4 [EDIT].
3 Use the numeric keypad, function keys and the
[MULTI/CH] control to configure the time.
A numeric value can be entered by pressing the corresponding
key on the numeric keypad.
Key/Control
F2 [–]/ F3 [+]
[MULTI/CH]
F4 [ ]/ F5 [ ]
4 Press F6 [OK].

Configuring the Local Clock Time Zone

Follow the steps below to configure the time zone of the local clock.
1 Select Clock Menu [02] "Timezone (Local Clock)".
2 Press F4 [SELECT].
3 Press F2 [–]/ F3 [+] or turn the [MULTI/CH] control
to select the time zone of the local clock.
UTC-14:00 to UTC+00:00 (default) to UTC
Setting Value
+14:00 (15min/step)
4 Press F6 [OK].
Behavior
Selects a setting value.
Moves the cursor.
Behavior
Selects a setting value.
Moves the cursor.
14-1