On-board help
Save asset measurements
Save an asset
Before the device is switched off, dimensions, measurements, results and all settings can be
saved for analysis, future use or record purposes in the device internal memory or transferred
through Cloud or USB to ARC 4.0 the PC software. Asset measurements are saved from the res-
ults screen.
To save an asset measurement, tap the menu item "Save" then use the onscreen keyboard to
enter the measurement file name.
Once asset name has been entered, tap
the location where asset measurements are saved.
Note
If for any given reason, the asset is not to be saved, tap the cancel icon [
Asset refers to machinery and equipment within a plant. The asset is listed as an Asset ID.
Access "Asset park" through the home screen.
Shop for Fluke products online at:
to save the asset under "Asset park". This is
MyFlukeStore
www.
] to cancel.
1.888.610.7664
.com