Makita HW001G Instruction Manual page 18

4. Squeeze the trigger until the remaining water in
the high pressure washer is discharged.
Fig.32
NOTICE:
Do not run the motor for longer than 1
minute.
5.
Switch off the high pressure washer and remove
the battery cartridges.
1
Fig.33
► 1. Battery cartridge
6. Disconnect the high-pressure hose from the trig-
ger gun and the high pressure washer.
1
2
Fig.34
► 1. Trigger gun 2. High-pressure hose
NOTICE:
To prevent the high-pressure hose from
being damaged, drain the remaining water in the
hose before storing.
2
7. Hold the machine with both hands, and drain the
remaining water inside of the machine by tilting the
machine as shown in the figure.
Fig.35
MAINTENANCE &
STORAGE
WARNING:
cartridges are removed from the machine before
storing or carrying the machine or attempting to
perform inspection or maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
Carrying the machine
CAUTION:
Before carrying the machine with
both hands, make sure that the handle is folded
completely.
When carrying the machine, hold the machine firmly
with both hands by holding the handle with one hand
and the bottom grip with the other hand.
2
Fig.36
► 1. Handle 2. Bottom grip
18 ENGLISH
Always be sure that all the battery
1