Makita HW001G Instruction Manual page 13

NOTE: The hose assembly ships with coupling
sleeves attached to both ends. When connecting to a
faucet without a coupling sleeve, remove the coupling
sleeve at one end by turning the coupling sleeve in
the direction of the arrow shown in the figure.
1
Fig.13
► 1. Nut of the coupling sleeve 2. Coupling sleeve
1. Connect the hose assembly to the faucet. Apply
a suitable fitting such as hose band or water tap joint to
secure the hose end with the faucet.
1
Fig.14
► 1. Hose band 2. Coupling sleeve 3. Hose assembly
NOTICE:
Connect the hose assembly to the
faucet securely. Otherwise, the hose assembly may
come off when you open the faucet.
NOTE: The fitting depends on the shape of the faucet to which
you connect. Prepare a suitable commercially-bought fitting.
2. Attach the water hose connector to the inlet, and then
attach the coupling sleeve to the water hose connector.
1
Fig.15
► 1. Coupling sleeve 2. Water hose connector 3. Inlet
2
2
3
3
2
NOTICE:
When attaching the water hose con-
nector and coupling sleeve, attach them securely.
Otherwise, the water hose connector or coupling
sleeve may come off when you open the faucet.
Connecting/disconnecting the
nozzle
CAUTION:
Always lock the trigger of the
trigger gun when connecting/disconnecting the
nozzle.
CAUTION:
When connecting the nozzle to the
trigger gun, connect it securely and make sure
that it does not come off.
CAUTION:
When connecting or disconnect-
ing the nozzle, do not rotate it forcibly. Otherwise,
the nozzle may break or come off and cause an injury.
Insert the end of the nozzle into the slot on the trigger
gun, and turn it in the direction of the arrow as shown in
the figure while pressing the nozzle toward the trigger
gun. To disconnect the nozzle, turn the nozzle in the
reverse direction while pressing it toward the trigger
gun, and then pull it out.
3
Fig.16
► 1. Trigger gun 2. Slot 3. End of the nozzle
Connecting the foam nozzle
Optional accessory
CAUTION:
Always lock the trigger of the
trigger gun when connecting/disconnecting the
nozzle.
NOTICE:
Use only neutral detergents. Do not
use household detergents, acid detergents, alka-
line detergents, bleaches, solvents, flammable
material, or industrial grade solutions, which may
damage the machine or your property. Prepare
cleaning solution as instructed on the solution
bottle, and always test it in an inconspicuous
place in advance.
NOTICE:
If a highly viscous detergent is used,
the nozzle is likely to clog. When using the high
viscosity detergent, dilute the detergent by add-
ing water to the bottle before use.
13 ENGLISH
1
2