Table of Contents
Advertisement
User's Manual
7.2 Independent Short Circuit Test
In CC/CV/CP/CR mode, when the electronic load is with voltage (at least 0.5V), press Shift and then
press the right arrow key (Shift+→ = short) to turn on the short circuit test mode, the short circuit
mark [Short] will appear on the screen, indicating that the electronic load is ready for short circuit
test.
Operation Steps
After the instrument is boot-up, press CH key to select the channel, yellow wireframe area is the
1.
selected channel and it will display the prompt of CH1 or CH2 at top of the screen (UTL8211+
single channel don't need to choose.)
Press Shift+Mode key to enter the main menu interface.
2.
Rotate the rotary knob to select the parameter setting and press Enter key to enter the set
3.
interface.
Rotate the rotary knob to set the time for short circuit and press Enter key to complete the
4.
setting.
Press Mode key to enter selection interface, select CC/CV/CP/CR mode, press
5.
(short) to enter short circuit mode, the short circuit mark [Short] will appear on the screen,
indicating that the electronic load is ready for short circuit test.
Rotate the rotary knob to set the current value, press ON1/ON2 key to complete the short circuit
6.
test.
7.3 Parameter Input and Operation Control
The electronic load has two parameter input methods. User can use direction key or rotary konb to
change the parameter.
7.3.1 Parameter Input
In parameter setting interface, use direction key or rotary konb to input the parameter.
If the parameter is out of the range, press Enter key cannot save the setting. The parameter should be
reset.
7.3.2 Operation Control
When the electronic load is power on but not in loading state, press ON1/ON2 key on the front panel
to control the input switch of the electronic load
If ON indicator is illuminated, it indicating that the electronic load is in load state; If ON indicator is
extinguished, it indicating that the electronic load is not in load state.
Instruments.uni-trend.com
UTL8200+ Series DC Electronic Load
Shift +
24 / 33
Advertisement
Table of Contents
