Table of Contents
Advertisement
SETUP AND INSTALLATION
Installing / replacing the battery
1.
Push the button and unscrew the battery cover. Use a coin to turn the battery cover counterclockwise
until the cover opens.
2.
Install new battery into the compartment.
Remove the old battery and install new one (CR2032). Ensure that the side with a "+" is facing up.
3.
Put the cover back. Then use a coin to turn the battery cover clockwise to lock it in place.
CAUTION:
To ensure safe operation, please observe the following precautions:
‡
Use CR2032 type battery.
‡
Avoid contact with water or liquid.
‡
Do not expose the remote control to moisture or heat.
‡
Do not drop the remote control.
‡
If the battery has leaked in the remote control, carefully wipe the case clean and install new battery.
‡
Risk of an explosion if battery is replaced by an incorrect type.
‡
Dispose of used battery according to the instructions.
Warning: Do not ingest battery, Chemical Burn Hazard.
‡
This product contains a coin / button cell battery. If the coin / button cell battery is
swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
Warning: Keep new and used batteries away from children.
‡
If the battery compartment does not close securely, stop using the product and keep it
away from children.If you think batteries might have been swallowed or placed inside any
part of the body, seek immediate medical attention.
19
English
Advertisement
Table of Contents
