Table of Contents
Advertisement
USING THE PROJECTOR
Audio mode
To play music from your smartphone or from the flash disk, do the following:
1.
Connect the WiFi dongle to the projector. Refer to page 16.
2.
Enable Bluetooth on your smartphone and projector.
3.
Press the " " button on the remote control or select
4.
Select BT Speaker.
5.
Select your smartphone in the list of detected Bluetooth devices to start the pairing process.
Note:
If Bluetooth is not enabled and/or WiFi dongle is not connected to the projector, then the
projector will display the below error message. Repeat steps 1 to 4 and try again to connect the
projector to your smartphone.
24
English
on the Home page.
Advertisement
Table of Contents
