Advertisement
Quick Links
Safety
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
‐
Reorient or relocate the receiving antenna.
‐
Increase the separation between the equipment and receiver.
‐
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
‐
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this
equipment.
This transmitter must not be co‐located or operating in conjunction with any other
antenna or transmitter.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Industry Canada statement:
This device complies with ISED's licence‐exempt RSSs. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Le présent appareil est conforme aux CNR d' ISED applicables aux appareils radio
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Optoma OP1500
Summary of Contents for Optoma OP1500
- Page 1 Safety Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: ‐ Reorient or relocate the receiving antenna. ‐ Increase the separation between the equipment and receiver. ‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐ Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co‐located or operating in conjunction with any other antenna or transmitter. ...
- Page 2 exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. Radiation Exposure Statement: This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements ISED établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps Product Introduction Package Overview Carefully unpack and verify that you have the items listed below under standard accessories. Some of the items under optional accessories may not be available depending on the model, specification and your region of purchase. Please check with your place of purchase. Some accessories may vary from region to region. Standard Accessories ...
-
Page 3: Product Introduction
Product Introduction Overview No Item 1. Lens 2. Lens Cover ... - Page 4 No Item No. Item 1. Power Key 6. HDMI 2 2. Power Socket 7. Audio Out 1. USB‐WiFi Dongle 8. Power Off Key 2. USB‐Wire Connection 9. Air outlet 5. HDMI 1 Item Air inlet/Speaker Item Focus Wheel...
- Page 5 Air inlet/Speaker Item Item IR Receiver Menu Direction Keys Home Enter Display Mode Return LED Indicators Green Flashing Battery Power on Power on but Power off Charging lens cover is closed ...
- Page 6 Item Item Mounting Hole Projector Stand Screw Hole Anti-slip Mat Anti-slip Mat ...
-
Page 7: Direction Keys
Remote Control Item Item 1 Power Key 7 Enter 2 Volume Down 8 Direction Keys 3 Return 9 Menu 4 Display Mode 10 BT 5 Mute 11 Home 6 Volume Up ... - Page 8 Using the Projector Power on/off the projector Power on Ensure the power lead is connected or the battery is charged。 Press the Power key on the projector or remote, or open the lens cover to turn on the projector. Connect the source to the projector via HDMI cable. Startup screen will last around 5 seconds and the LED indicator will be steady green. Power off Press the Power key on the projector or the remote, or close the lens cover to turn off the projector. The LED will be off after the projector is turned off. Select Input Source The projector can receive signal via HDMI, smart phone or wireless network. Projector Keypad 1. Press the Power key to turn on/off the projector. 2. Press direction keys to select items or adjust values. 3. Press OK to enter the selected item. 4. Press Menu to bring up the menu. 5. Press Back to return to previous page. 6. Press Display Mode to switch between display modes. 7. Press Home to return to home screen. Remote Control ...
- Page 9 Home Screen It is the default page when your turn on the projector. In home screen your can switch between different input sources. Input Source 1. When input source is connected When input source is connected and selected 2. When input source is selected but not connected. ...
- Page 10 When input source is connected Input Source Icon Function Description HDMI 1 Select HDMI 1 as the input source HDMI 2 Select HDMI 2 as the input source Wifi Display Select WiFi as the input source USB Display Select USB as the input source ...
- Page 11 How to Connect HDMI Connect HDMI cable to the HDMI connector on the projector. After the HDMI icon shows connected, select the icon to start playing the video. How to Connect Smart Phone Connect your smart phone to the projector via charging cable. Select the USB icon and you will be directed the page below: 1. For iPhone Select Trust 2. For Android Please download EZCastPro from Google Play Store : EZCastPro Connect your phone to the projector ...
- Page 12 Select USB icon on the home screen. ...
- Page 13 Turn on USB Tethering on your smart phone Open the EZCastPro on your phone and select the projector ...
- Page 14 Press the top left icon to enter the setting page ...
- Page 15 How to connect wireless network 1. Plug in WiFi dongle 2. Select WiFi input source on the home screen 3. Follow the steps below to pair the projector Turn on WiFi on your phone and select EZProjector_XXXXXXXX Enter the password 87654321 Open the EZCastPro on your phone and select the “EZProjector_xxxxxx” ...
- Page 16 Press the top left icon to enter the setting page and turn of Mirror Screen ...
- Page 17 Press the top left icon to enter the setting page to connect the projector to the wireless network. ...
- Page 18 Select Network Setting Select the wireless network you want to connect and enter the password Home Screen Icon 1. Not selected 2. Selected ...
- Page 19 Input Source Icon Function Description Mute/Unmute Mute/Unmute Turn of/off Bluetooth Turn on Bluetooth to pair the projector and BT speaker Open setting page Open setting page How to connect Bluetooth: 1. Select BT icon on the home screen or press the BT key on the remote 2. When Bluetooth is turned on, the projector will scan and list all available Bluetooth devices 3. Refresh if you do not see any Bluetooth device. 4. Select the device you want to pair. ...
- Page 20 ...
- Page 21 Setting Icon Function Description Network setting Network setting Setting Languages Auto power off: Off/15/30/60/120 minutes Brightness mode Bright / Eco USB Power On/Off High Altitude: On/Off Direct Power On: On/Off LED Projection Hour Reset: Enter Reset ...
- Page 22 Enter Image Projection Mode: Front / Rear Projection Position: Table / Ceiling Aspect Ratio: Auto/ 4:3/16:9/L.BOX Auto V. Keystone: On/Off V. Keystone: ‐30 ~ +30 H. Keystone: ‐20 ~ +20 Four Corner Correction: Enter Color Space: Auto/Limited range/Full Range Digital Zoom: 1.0/1.2/1.4/1.6/1.8 Reset: Enter Display Display Mode: Cinema/ Game/ Bright/ sRGB Wall Color : White/Yellow/Blue/Pink/Green Brightness : 0~100 Contrast: 0~100 Saturation : 0~100 Contrast : 0~3 ...
- Page 23 Gamma: Cinema/Video/Graphics/Standard Color Temperature: Standard/Cool/Cold/Native Tone: ‐50~50 Gain/Bias: R Gain/G Gain/B Gain/ R Bias/ G Bias/B Bias (0~100) Reset : Enter Audio Volume: 0~40 Bluetooth : On/Off Mute : On/Off Reset : Enter Troubleshooting If you experience a problem with your projector, please refer to the following information. If the problem persists, please contact your local reseller or service ...
- Page 24 1. Turn off the projector using remote control or power key on the projector 2. Wait for 10 seconds 3. Use needle to press the button inside the small hole on the rear of the projector. 4. Turn on the projector 5. If the problem persists, please contact your local reseller or service center. Problem Solution Why can I turn on the projector? Most likely it’s because the battery runs out of power. Please ensure the battery is charged for at least 4 hours before the first use. If the projector still cannot power on, please use a needle to press the small hole on the rear of the projector. Why does the sound come from my The projector supports image mirroring Android phone when I am mirroring the only for Android phone. screen to the projector? Why can’t I display the image from my Please ensure your Android phone Android phone wirelessly? supports Miracast (naming may vary on different brand’s phone) Why is my projector’s temperature so It is normal as the projector is a high? high‐lumen product. Please be assured that a proper cooling system has been implemented on the projector. Why is there no image when the HDMI Please ensure the HDMI cable is port is connected? properly plugged in the HDMI port and the correct input source has been ...
- Page 25 規格 Features OP1500 A Portable Full HD Projector with Typical 650 ANSI Lumens Main features Brightness, Versatile Connectivity , iPhone/iPad USB display , Stunning Sound Quality and Battery Capacity Optical 650 ANSI lm @ FHD HDMI ＆ USB projection Application...
-
Page 26: Safety Instruction
Safety Instruction Do not stare into the beam. As with any bright source, do not stare into the direct beam, RG2 IEC 62471‐5:2015. Do not block any ventilation openings. To ensure reliable operation of the projector and to protect from overheating, it is recommended to install the projector in a location that does not block ventilation. As an example, do not place the projector on a crowded coffee table, sofa, bed, etc. Do not put the projector in an enclosure such as a book case or a cabinet that restricts air flow. To reduce the risk of fire and/or electric shock, do not expose the projector to rain or moisture. Do not install near heat sources such as radiators, heaters, stoves or any other apparatus such as amplifiers that emits hea Do not let objects or liquids enter the projector. They may touch dangerous voltage points and short out parts that could result in fire or electric shock. Do not use under the following conditions: ‐ In extremely hot, cold or humid environments. (i) Ensure that the ambient room temperature is within 5°C ~ 40°C (ii) Relative humidity is 10% ~ 85% ‐ In areas susceptible to excessive dust and dirt. ‐ Near any appliance generating a strong magnetic field. ‐ In direct sunlight. Do not use the projector in places where flammable gases or explosives gases may be present in the atmosphere. The lamp inside the projector becomes very hot during operation and the gases may ignite and result in a fire Do not use the unit if it has been physically damaged or abused. Physical damage/abuse would be (but not limited to): ‐ Unit has been dropped. ‐ Power supply cord or plug has been damaged. ‐... - Page 27 Do not place the projector on an unstable surface. The projector may fall over resulting in injury or the projector may become damaged. Do not block the light coming out of the projector lens when in operation. The light will heat the object and could melt, cause burns or start a fire. Please do not open or disassemble the projector as this may cause electric shock. Do not attempt to service the unit yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. Please call Optoma before you send the unit for repair The unit should only be repaired by appropriate service personnel. Only use attachments/accessories specified by the manufacturer Do not look into straight into the projector lens during operation. The bright light may harm your eyes When switching the projector off, please ensure the cooling cycle has been completed before disconnecting power. Allow 90 seconds for the projector to cool down. Turn off and unplug the power plug from the AC outlet before cleaning the product. Use a soft dry cloth with mild detergent to clean the display housing. Do not use abrasive cleaners, waxes or solvents to clean the unit. Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Do not setup the projector in places where it might be subjected to vibration or shock. Do not touch the lens with bare hands. Remove battery/batteries from remote control before storage. If the battery/batteries are left in the remote for long periods, they may leak. Do not use or store the projector in places where smoke from oil or cigarettes may be present, as it can adversely affect the quality of the projector performance. Please follow the correct projector orientation installation as non‐standard installation may affect the projector performance. Use a power strip and or surge protector. As power outages and brown‐outs can ...
Need help?
Do you have a question about the OP1500 and is the answer not in the manual?
Questions and answers