Hitachi PV-X95N Instruction Manual page 15

3 Installation
3.1 Intended use
This appliance is intended for household use and it is not suitable for industrial use.
3.2 Installation of the charging dock
Assembly the charging dock
in the direction of arrow.
3.3 Installation of the body and the brush
Push the tube in the
direction of arrow towards
the body by pushing
on the tube release button.
120 cm
Install the charging dock at
a height of minimum 120 cm
from the ground.
Fix two dowels on the wall.
Press the electric turbo
brush release button on
the electric turbo brush and
push it in the direction of
arrow towards the tube.
Place two screw into their
location on the charging
dock and mount on the
dowels on the wall.
Plug the AC Adaptor to
the socket.
Attach crevice attachment
and combination tool,
Motorized bed brush to
the charging dock.
ENGLISH 15