Table of Contents
Advertisement
Operating the appliance
en
Use the & button to navigate to the next line.
5.
Use the ( or ) button to select the current year.
6.
Press the % button repeatedly until "Date" appears.
7.
Use the ) button to apply the settings.
8.
The initial use is complete.
Notes
You can change these settings at any time in the
■
basic settings. ~ "Basic settings" on page 15
After connecting the appliance to the power or
■
following a power cut, the settings for initial use are
shown in the display.
Cleaning the cooking compartment
To remove the new-appliance smell, heat up the
cooking compartment when it is empty and with the
oven door closed.
Remove the accessories from the cooking
1.
compartment.
Remove leftover packaging, such as polystyrene
2.
pellets, from the cooking compartment.
Before heating the appliance, wipe the smooth
3.
surfaces in the cooking compartment with a soft, wet
cloth.
Use the # touch button to switch on the appliance.
4.
Set the heating type and temperature, then start the
5.
appliance operation. ~ "Setting and starting the
appliance operation" on page 12
Settings
Heating type
Top/bottom heating ƒ
Temperature
240 °C
Cooking time
1 hour
Keep the kitchen ventilated while the appliance is
6.
heating up.
Use the # touch button to switch off the appliance
7.
after the indicated cooking time.
Wait until the cooking compartment has cooled
8.
down.
Clean the smooth surfaces with soapy water and a
9.
dish cloth.
Cleaning the accessories
Clean the accessories thoroughly using soapy water
and a dish cloth or soft brush.
12
1Operating the appliance
Y ou have already learnt about the controls and how
O p e r a t i n g t h e a p p l i a n c e
they work. Now we will explain how to set your
appliance. You will learn about what happens when you
switch the appliance on and off, and how to select the
operating mode.
Switching the appliance on and off
To switch the appliance on or off, touch the # touch
button.
After the appliance has switched off, the display shows
whether the residual heat in the cooking compartment
is high or low.
Display
Residual heat high
Residual heat low
Notes
Certain indicators and instructions (e.g. about
■
residual heat in the cooking compartment) remain
visible on the display even when the appliance is
switched off.
After the appliance has completed an operation, you
■
will hear the cooling fan continuing to run until the
cooking compartment is cooled as much as
possible.
Switch off your appliance when you do not need to
■
use it. If no settings are made for a long time, the
appliance switches off automatically.
Setting and starting the appliance operation
Example: CircoTherm hot air ‚ at 170 °C
Touch the # touch button to switch on the
1.
appliance.
You are taken directly to the ¢ menu for the types of
heating.
Temperature
above 120 °C
between 60 °C und 120 °C
Advertisement
Table of Contents
