Table of Contents
Advertisement
Step 3:
Assembly of connecting rod (handlebar) and console post
NOTICE
L
A black plastic buckle (75) is attached to your device. This is used as an aid for connecting the
upper and lower tension cable (73 & 74).
1.
Push the upper protective cover (28) up (see fig. (a)). Then you connect the cables (64 & 65) and
the Bowden cables (73 & 74), see fig. (b) & A).
2.
Remove the plastic buckle (75).
3.
Slide the handlebar post (29) on the main frame and mount it with a curved washer (13), an Allen
screw (20), and a washer (72). Mount the protective cover back on the main frame.
4.
Mount the handlebar (36) on the handlebar post (29) with the protective cover (42), a washer
(43), a spring washer (12), a bushing (45), and a ball-shaped control knob (37).
14
HT 30
Advertisement
Table of Contents
