Table of Contents
Advertisement
2.3
Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
NOTICE
L
First loosely screw all parts together and check that they fit properly. Then tighten the screws
using the tool only when you are instructed to do so.
Step 1:
Assembly of base
1.
Mount the front base (4) and the rear base (2) with a cap nut (6), an Allen screw (7), a spring
washer (12), and a curved washer (13) on the main frame (1).
2.
Level the equipment by turning the wheel of the rear foot cap.
12
HT 30
Advertisement
Table of Contents
