System Board - HP EliteBook 830 G5 Maintenance And Service Manual

System board

NOTE: All system board spare part kits include replacement thermal material.
All system boards use the following part numbers:
xxxxxx-001: Non-Windows operating systems
xxxxxx-601: Windows operating system
Description
Intel i7-8650U processor
Intel i7-8550U processor
Intel i5-8350U processor
Intel i5-8250U processor
Intel i5-8130U processor
Intel i7-7600U processor
Intel i7-7500U processor
Intel i5-7300U processor
Intel i5-7200U processor
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
6. Remove the keyboard (see
7. Remove the RJ-45 board and bracket (see
8. Remove the fan (see
When replacing the system board, be sure to remove the following components (as applicable) from the
defective system board and install on the replacement system board:
● Solid-state drive (see
● Memory modules (see
● WLAN/Bluetooth module (see
● WWAN module (see
● Heat sink (see
Remove the system board:
Bottom cover on page
Battery on page
Keyboard on page
Fan on page 65).
Solid-state drive (SSD) on page
Memory modules on page
WLAN/Bluetooth combo card on page
WWAN module on page
Heat sink assembly on page
38).
40).
50).
RJ-45 board with bracket on page
42)
44)
48)
54)
Component replacement procedures
Spare part number
L13712-001
L13711-001
L13710-001
L13709-001
L32726-001
L42314-001
L42313-001
L13708-001
L13707-001
57).
46)
67