Sidestand - Yamaha X-MAX 125 ABS 2018 Owner's Manual

Instrument and control functions
1
2
3
4
5
ZAUM1545
1. Position indicator
2. Spring preload adjusting ring
3. Spring preload adjusting tool
4
Spring preload setting:
Minimum (soft):
1
Standard:
3
Maximum (hard):
5

Sidestand

1
ZAUM0648
1. Sidestand switch
The sidestand is located on the left
side of the frame. Raise the sidestand
or lower it with your foot while holding
the vehicle upright.
TIP
The built-in sidestand switch is part of
the ignition circuit cut-off system,
which cuts the ignition in certain situa-
tions. (See the following section for an
explanation of the ignition circuit cut-
off system.)
WARNING
The vehicle must not be ridden with
the sidestand down, or if the side-
stand cannot be properly moved up
(or does not stay up), otherwise the
sidestand could contact the ground
and distract the operator, resulting
in a possible loss of control.
Yamaha's ignition circuit cut-off
system has been designed to assist
the operator in fulfilling the respon-
sibility of raising the sidestand be-
fore starting off. Therefore, check
this system regularly and have a
Yamaha dealer repair it if it does not
function properly.
4-26
EAU15306
EWA10242