Yamaha X-MAX 125 ABS 2018 Owner's Manual page 37

TIP
If traveling at speeds under 10 km/h (6
mi/h), "_ _._" is displayed.
Average speed display
ZAUM1496
1. Average speed display
The average speed "Average_ _ _kmh"
or "Average_ _ _MPH" (for the UK) is
displayed.
The average speed is the total distance
divided by the total time (with the main
switch in the "ON" position) since the
display was last reset to zero.
This display shows the average speed
since it was last reset.
To reset the average speed display,
select it by pushing the "INFO" switch,
and then push the "INFO" switch for
three seconds.
Warning message function
This function displays a warning mes-
sage corresponding to the current
warning.
"L FUEL": Appears when the last seg-
ment of the fuel meter starts flashing. If
"L FUEL" is displayed, refuel as soon
as possible.
Instrument and control functions
"H TEMP": Appears when the top seg-
ment of the coolant temperature meter
starts flashing. If "H TEMP" is dis-
played, stop the vehicle, then stop the
engine, and let the engine cool.
"ICE": Appears when the icy road
warning indicator " " starts flashing. If
"ICE" is displayed, be careful of icy
1
roads.
"OIL SERV": Appears when the oil
change indicator "OIL" starts flashing.
If "OIL SERV" is displayed, change the
engine oil, and then reset the oil
change indicator and oil change trip-
meter.
"V-BELT SERV": Appears when the V-
belt replacement indicator "V-Belt"
starts flashing. If "V-BELT SERV" is
displayed, replace the V-belt, and then
reset the V-belt replacement indicator
and V-belt replacement tripmeter.
When there are two or more warnings,
the warning messages are displayed in
the following order:
L FUEL → H TEMP → ICE → OIL SERV
→ VBELT SERV → L FUEL
4-11
4