Page 1
HAND HELD ENDOSCOPE WITH SCREEN OPERATING MANUAL We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us.
Page 2
CustomerService@vevor.com This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
Page 3
NOTICE 1. Before use, please use 5V1A charger to fully charge the device 2. Please use a high-quality TF (micro SD) card 3. Only in the effective focal length can the photos be reflected most clearly. Be sure to observe the target object within the effective focal length.
Page 4
PRODUCT DESCRIPTION 1. It supports micro TF cards of up to 64GB, and only supports TF cards of class 10 or higher FAT32 format (including TF cards when shipping). 2. Charging interface; 5V 1A power supply. 3. Switch on/off key: long press for 2 seconds to start the machine, long press for 2.5 seconds to turn off the machine, short press the freeze frame screen to lock the screen, and short press to exit the freeze frame to enter the real screen.
Page 5
12. Charging prompt: when charging, the red light at the switch/0K key is on, and when fully charged, the red light is off. 13. The working temperature of this product is - 10℃-70 ℃. 14. The waterproof grade of this product is IP67 15.
Page 6
TROUBLESHOOTING Tips: Charge before use Question Resolution 1. Check whether the battery is charged 2. Check whether the power on key is normal Unable to start 3. Check whether the charging is normal 1. Check whether the memory card format is correct (only FAT32 file format is supported) Unable to read 2.
Page 7
FCC INFORMATION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. This product is subject to the provision of European Directive 2012/19/EC.
Page 8
Support and E-Warranty Certificate https://www.vevor.com/support Made In China...
Need help?
Do you have a question about the SC8 Series and is the answer not in the manual?
Questions and answers