Selecting And Setting A Programme - Siemens HB76GB 60 Series Instruction Manual

Programmes
Made from fresh pork
Pork
Joints with a crust should be placed in the dish with the crust
side up. Score the rind to make a grid-like pattern, without
cutting into the meat.
Programmes
Pork
Neck joint, fresh, boned
Neck joint, frozen, boned
Roast loin, fresh
Rolled roasting joint, fresh
Joint with crust, fresh, belly
Ham joint, fresh, cured, cook
Ham joint, fresh, cured, brown

Selecting and setting a programme

First choose a suitable programme from the programme table.
Example in the diagram: setting for pot-roasted beef, fresh,
programme 7, weight of meat 1.3 kg.
Press the X button.
1.
The first programme number appears on the temperature
display.
Select the desired programme number using the rotary
2.
selector.
Press the button.
‚
3.
A suggested weight appears on the clock display.
Programme num- Weight range in kg
ber
P33* 0.3-3.0
Place ham joints in the dish with the layer of fat facing upwards.
Cook in an uncovered dish until a brown crust forms.
When roasting joints of meat, set the weight of the meat. For
rolled roasting joints, set the total weight.
Programme num- Weight range in kg
ber
P34 0.5-3.0
P35* 0.5-2.0
P36 0.5-2.5
P37 0.5-3.0
P38 0.5-3.0
P39 1.0-4.0
P40* 1.0-4.0
4.
5.
The programme has ended
A signal sounds. The oven stops heating. You can cancel the
signal earlier by pressing the
Changing the programme duration
The duration of the programme cannot be changed.
Changing the programme
Once a programme has been started, it can no longer be
changed.
Opening the oven door
Operation is suspended. The
is closed again, operation resumes.
Pausing operation
Press the
flashes. To unpause, press the
lights up. The programme will then continue.
Cancelling the programme
Press and hold button
160 °C appear. You can make new settings.
Setting a later end time
See the section entitled Time-setting options - Setting a later
end time.
Add liquid
No
Add liquid
Yes
Yes
Yes
Yes
No
A little
No
Turn the rotary selector to change the weight.
Press the button.
†
The programme starts. You will see the cooking time
counting down on the clock display.
button briefly. The oven is paused. The
†
until the
†
Weight setting
Total weight
Weight setting
Weight of meat
Weight of meat
Weight of meat
Total weight
Weight of meat
Weight of meat
Weight of meat
0 button.
† button flashes. When the door
†
† button again. The †
symbol for 3D hot air and
:
button
button
25