Bosch HBJ559EB6M User Manual And Installation Instructions page 22

en Rails
Remove accessories and cookware from the cook-
1.
ing compartment.
Detach the shelf supports and remove them from
2.
the cooking compartment.
→ "Rails", Page 22
Remove coarse dirt using soapy water and a soft
3.
cloth:
– From the cooking compartment floor
– From the inside of the appliance door
– From the glass cover on the oven light
This prevents stubborn stains.
The cooking compartment must be completely
4.
empty.
14.3 Setting the cleaning function
Keep the kitchen ventilated while the cleaning function
is running.
WARNING ‒ Risk of burns!
The outside of the appliance gets very hot when the
cleaning function is in progress.
Never touch the appliance door.
▶
Allow the appliance to cool down.
▶
Keep children at a safe distance.
▶
Requirement: Prepare the appliance for the cleaning
function. → Page 21
Rails
15 Rails
To clean the rails and cooking compartment thor-
oughly, you can remove the shelf supports.
15.1 Unhooking the rails
WARNING ‒ Risk of burns!
The rails can be very hot.
Never touch the rails when they are hot.
▶
Allow the appliance to cool down.
▶
Keep children at a safe distance.
▶
Lift the front rail upwards and unhook it.
1.
22
Press ⁠ .
1.
The duration and
The duration of 1 hour cannot be changed.
Press .
2.
a After a few seconds, the cleaning function starts and
the duration counts down.
a When the cleaning function ends, a signal tone
sounds and the duration is at zero on the display.
Switch off the appliance.
3.
4. Wipe the appliance. → Page 22
14.4 Wiping the appliance after the cleaning
function
Allow the appliance to cool down.
1.
Wipe the cooking compartment with a damp cloth.
2.
Note: During operation and while the cleaning func-
tion is active, reddish patches may form on the sur-
faces. This is not corrosion but rather residue from
food that contains salt. Nutrients such as sugars
and proteins are not removed from the surface coat-
ing and may stick to the surface. These spots are
not harmful and do not impair the cleaning ability of
the self-cleaning surfaces.
Attach the shelf supports.
3.
→ "Rails", Page 22
Then push the entire rail to the front and remove it.
2.
15.2 Attaching the rails
First insert the rail into the rear socket, press it to
1.
the back slightly
appear on the display panel.