Table of Contents
Advertisement
en Programmes
a After a few seconds, the appliance starts heating
and the cooking time counts down.
a When the cooking time has elapsed, a signal
sounds and the duration is at zero in the display.
When the cooking time has elapsed:
3.
Press any button to end the signal prematurely.
‒
To set another cooking time, press the
‒
When the dish is ready, switch off the appliance.
‒
Changing the cooking time
The cooking time can be changed at any time.
is highlighted in the display.
Requirement:
Change the cooking time using the
▶
a The appliance applies the change after a few
seconds.
Cancelling the cooking time
The cooking time can be cancelled at any time.
is highlighted in the display.
Requirement:
Reset the cooking time to zero using the
▶
a After a few seconds, the appliance applies the
change and continues to heat without a cooking
time.
8.4 Setting the end time
You can delay the time at which the cooking time is
due to end by up to 23 hours and 59 minutes.
Notes
¡ In order to achieve a good cooking result, do not
delay the end time once the appliance is already in
operation.
¡ Food will spoil if you leave it in the oven cavity too
long.
Requirements
¡ The type of heating and temperature or setting have
been set.
¡ A cooking time must be set.
Press
repeatedly until
1.
play.
Press the
or
button.
2.
a The display shows the calculated end time.
Programmes
9 Programmes
The programmes help you to use your appliance to
prepare different dishes by selecting the optimum set-
tings automatically.
9.1 Suitable cookware for programmes
You should therefore use heat-resistant cookware that
is suitable for temperatures up to 300 °C.
9.2 Programme table
The programme numbers are assigned to specific foods.
Note: You can access the last 20 programmes via the Home Connect app.
12
button.
or
button.
button.
is selected in the dis-
Use the
or
button to delay the end time.
3.
a After a few seconds, the appliance applies the set-
ting and the display shows the set end time.
a Once the calculated start time has been reached,
the appliance starts heating up and the cooking
time starts counting down.
a When the cooking time has elapsed, a signal
sounds and the duration is at zero in the display.
When the cooking time has elapsed:
4.
Press any button to end the signal prematurely.
‒
To set another cooking time, press the
‒
When the dish is ready, switch off the appliance.
‒
Changing the end time
In order to achieve a good cooking result, you can only
change the set end time before operation starts and
the cooking time starts counting down.
is highlighted in the display.
Requirement:
Use the
or
button to delay the end time.
▶
a The appliance applies the change after a few
seconds.
Cancelling the end time
You can delete the set end time at any time.
is highlighted in the display.
Requirement:
Reset the end time to the current time plus the set
▶
cooking time using the
a After a few seconds, the appliance applies the
change and starts heating up. The cooking time
counts down.
8.5 Setting the time on the clock
Once the appliance has been connected to the mains
or following a power failure, the time flashes on the dis-
play. The time starts at "12:00". Set the current time.
Use the
or
button to set the time.
1.
Press the
button.
2.
a The time that is set appears in the display.
Tip: You can define whether the time is shown in the
display in the basic settings.
Glass or glass ceramic cookware is best. The joint
should cover approx. two thirds of the cookware base.
Cookware made from the following material is not
suitable:
¡ Bright, shiny aluminium
¡ Unglazed clay
¡ Plastic or plastic wire rack
button.
button.
Advertisement
Chapters
Table of Contents
