Table of Contents
Advertisement
en Before using for the first time
Before using for the first time
5 Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
5.1 Initial configuration
You have to implement settings for the initial configura-
tion before you can use your appliance.
Setting the time on the clock
Once the appliance has been connected to the mains
or following a power failure, the time flashes on the dis-
play. The time starts at "12:00". Set the current time.
Use the
or
button to set the time.
1.
Press the
button.
2.
a The time that is set appears in the display.
Tip: You can define whether the time is shown in the
display in the basic settings.
5.2 Cleaning the appliance before using it
for the first time
Clean the cooking compartment and accessories be-
fore using the appliance to prepare food for the first
time.
Basic operation
6 Basic operation
6.1 Switching on the appliance
Touch
.
▶
a The appliance is switched on.
a The symbols for the default type of heating and tem-
perature light up on the display panel.
6.2 Starting the appliance
You must start each operating mode.
Touch
.
▶
6.3 Setting the type of heating and the
temperature
Touch
.
1.
Select a type of heating in the settings area.
2.
Touch
.
3.
Select the temperature or grill setting in the settings
4.
area.
Touch
.
5.
a The appliance starts heating after a few seconds.
When the food is ready, switch off the appliance.
6.
Tips
¡ The most suitable type of heating for your food can
be found in the description of the type of heating.
¡ You can also set a cooking time and an end time
on the appliance.
→ "Time-setting options", Page 11
10
Remove the accessory and the leftover packaging,
1.
such as polystyrene pellets, from the cooking com-
partment.
Before heating, wipe the smooth surfaces in the
2.
cooking compartment with a soft, damp cloth.
3.
Ventilate the room while the appliance is heating.
Set the type of heating and the temperature.
4.
→ "Basic operation", Page 10
Type of heat-
3D hot air
ing
Temperature
Maximum
Cooking time
1 hour
Switch off the appliance after the specified cooking
5.
time.
Wait until the cooking compartment has cooled
6.
down.
Clean the smooth surfaces with soapy water and a
7.
dish cloth.
Clean the accessory with soapy water and a dish
8.
cloth or a soft brush.
Changing the type of heating
You can change the type of heating at any time. If this
is changed while the oven is operating, this operation
is paused.
Program a type of heating in the settings area.
▶
a Touch
.
Changing the temperature
You can change the temperature at any time.
Select the temperature or grill setting in the settings
▶
area.
Pausing or cancelling operation
To pause the operation:
1.
Touch
. The oven is paused. The display
‒
above
flashes.
a Touch
to end the pause.
2.
To cancel the operation:
Press and hold
‒
a The oven operation is interrupted and all settings
are reset.
6.4 Switching off the appliance
Touch
.
▶
a The appliance is switched off.
.
Advertisement
Chapters
Table of Contents
