Returning The Watch To Its Factory Default Settings - Casio 5419 Operation Manual

Checking for Mail
Important!
This feature was developed as of
●
2017, so access may currently be
restricted depending on the email
service you are using.
To access email with the CASIO
●
WATCH+ phone app, you may need
to lower the security level of your
email. Refer to the setup instructions
for your email service for details on
how to do this. If you do not wish to
lower the security level of your email,
please do not use this function.
This function may become
●
unavailable due to termination of
service or modification of
specifications by your mail service
provider.
You can use the watch to check if you have
new mail on your phone.
Getting ready
Register your mail address account with
CASIO WATCH+.
1.
Y Tap the "CASIO WATCH+" icon.
2.
X Hold down (C) for about 0.5 seconds
until the second hand points to R.
The second hand will move to e when a
connection is established between the
watch and phone.
3.
Y Tap in the following sequence: f n
"Alert settings".
4. Perform the operation shown on the
phone screen.
Refer to your mail service provider's mail
setup instructions for information about
how to set up your mail account.
Some accounts may not be supported.
●
Checking for Mail
●
1.
X If the watch is connected with a phone,
press (D). If the watch is not connected
with a phone, hold down (C) for about 0.5
seconds.
The mode hand will move to l or ¢.
l: You've got new mail.
¢: No new mail.
If you've got new mail
●
Use your phone to view your mail.
Operation Guide 5419
Phone Finder
You can use phone finder to trigger a tone on
the phone to make it easy to find. The tone is
forced to sound even if the phone is in vibrate
mode.
Important!
Do not use this function in areas
●
where phone call tones are
restricted.
The tone sounds at a high volume.
●
Do not use this function when
listening to phone output over
earphones.
1.
X If the watch is connected with a phone,
press (C) to terminate the connection.
2.
X Hold down (A) for about two seconds.
This will cause the watch to enter the
Calendar Mode.
3.
X Hold down (D) for about 0.5 seconds
until the second hand points to R.
The second hand will move to e when a
connection is established between the
watch and phone, and then the phone's
ringtone will sound.
It will take a few seconds before the
●
phone tone sounds.
4.
X Press any button to stop the tone.
You can press any watch button to stop
●
the phone tone, but only during the first
30 seconds after it starts to sound.
Configuring Watch Settings
You can use CASIO WATCH+ to specify the
Bluetooth connection auto disconnect time,
auto time adjustment timing and other
settings.
1.
Y Tap the "CASIO WATCH+" icon.
2.
X Hold down (C) for about 0.5 seconds
until the second hand points to the R mark.
The second hand will move to e when a
connection is established between the
watch and phone.
3.
Y Tap in the following sequence: f n
"Watch settings".
4.
Y Select the setting you want to change
and then perform the operation shown on
the phone screen.
Returning the Watch to Its
Factory Default Settings
This section explains how to use CASIO
WATCH+ to return the watch settings below
to their initial factory defaults.
Time adjustment
●
World time
●
Alarm
●
Stopwatch
●
Connection time
●
1.
X Pull out the crown to the second click.
2.
X Hold down (C) for about 5 seconds.
This will cause the second hand to
perform one revolution and return the
applicable settings to their factory
defaults.
7