Faq - Monoprice MP Voxel User Manual

FAQ

Q1: Do I need to perform extruder calibration after replacing the nozzle?
A1: Yes, perform extruder calibration as detailed in the
Q2: What do I do if the displayed extruder temperature is abnormal (e.g. 300°C) or is not
showing at all?
A2: The nozzle is not installed correctly. Reinstall the nozzle as detailed in the
THE NOZZLE
section above.
Q3: What do I do if no filament extrudes when trying to build a model?
A3: Perform the steps in the
Q4: How do I replace the filament?
A4: Perform the steps in the
Q5: How do I remove a finished model?
A5: Perform the steps in the
Q6: What do I do if the distance between the nozzle and the build platform is too much
or too little?
A6: Perform the steps in the
Q7: Is the printer compatible with AC voltages other than 110-120 VAC?
A7: Yes, the printer uses an AC power adapter, which can accept voltages from 100~240
VAC, 50/60 Hz.
CLEARING A CLOGGED NOZZLE
REPLACING FILAMENT
REMOVING A PRINTED MODEL
CALIBRATION
section above.
35
CALIBRATION
section above.
section above.
section above.
section above.
REPLACING